#VENETIAN PLASTER CONCRETE LOOK HOW TO#

These imperfections of finish are not to be considered as product defects, but are characteristics the natural mineral finish. These deposit tend to lesson over time as the surface is washed by further exposure to rain. To confer an increased degree of water repellency and compactness to the surface apply, after about 2/3 hours, with a steel trowel and pressing energetically, a layer of Cere D'Arte Wax or a layer of virgin beeswax.Exposure to persistent driving rain in the first few days after application, particularly to acid rain, can cause the formation of a whitish surface deposit due to the natural reaction of the calcium hydroxide that has not yet carbonised. At this point on the last layer, which has dried slightly, making sure that it is neither completely dry and nor excessively wet, proceed to the polishing by going over the surface repeatedly with a spatula, pressing hard.

#VENETIAN PLASTER CONCRETE LOOK HOW TO#

Apply one or two layers of Venetian Plaster Concrete Stucco with a steel trowel or spatula letting each layer dry before proceeding in order to obtain a perfectly smooth surface. How to Venetian or Concrete-Look Plaster your Fireplace: Determine if the fireplace is zero clearance or not. Ensure that a sufficient quantity of the same batch of paint is available to complete the entire job, or at least to complete whole sections that will not reveal shade or application variances.

Scaffolding should be erected in a way that allows work to be continued uninterrupted until a natural boundary of the building is reached, to avoid seams, overlaps and differences in shade. Stucco 34 is a cement-based product that is suitable for exterior finishes, and is. Fresco Concrete is a very durable decorative plaster finish looking identical to the many colors of natural concrete from smooth to heavy texture. Popular on Polished Stucco and Marmorino Fine due to its high gloss, it is ideal for the preservation and protection of interior Venetian plaster finishes used in the restoration of old historical buildings such as churches, palaces or villas to create surfaces of elevated aesthetic value in all settings whether modern or classic halls, stairway. Protect treated surfaces from rain for the time required to allow product to fully cure. It is suitable for feature walls, floors, ceilings, columns and corbelling. Do not apply product if rain is likely or in the presence of strong sunlight, strong wind. Apply in temperatures between 8-30☌ and relative humidity below 75%.

Venetian plaster concrete look